0,00 €
Felt lubricating gears have been a common solution for lubricating open gears on pinions, racks or slewing rings for around 100 years. Felt gears from STW have always been made from particularly high-quality and therefore wear-resistant felt material. It is 100% of natural origin. Genuine sheep’s wool makes up the largest proportion, and its properties are further improved by felting it with other natural fibers.
Modern felt gears are very durable thanks to their special wear resistance and dimensional stability. Other positive properties are
“The completely safe solution, even in the food sector”
The above-mentioned properties show why the felt gearwheel has maintained its position in the food sector in addition to the traditional industry: The inevitable abrasion of a moving lubricating gear, made from a 100% natural material, is generally considered to be completely harmless.
“Sustainability in function…”
Function of the felt gear wheel:
A complete lubrication system for lubricating gearing should consist of the following components:
Lubricant supply:
The lubricant supply should preferably be an automatic central lubrication system or a manual hand lever press (possibly supplemented by a central lubrication strip or a progressive distributor).
The lubrication gear is connected to the lubricant supply via high-pressure lines (usually STW-PA high-pressure lines, which can be installed in a particularly time-saving and uncomplicated manner using suitable high-pressure push-in fittings).
Connected to the axle of the lubricating gearwheel, the grease is fed through the axle into the channels of the felt gearwheel. It emerges from these channels at the surface of the lubricating gear and is distributed evenly in the felt structure to the tooth flank of the toothing to be lubricated.
| Einsatzbereich: | Schmierung offener Verzahnungen |
| Schmiermedium: | Fett bis NLGI3 Öl bis 30.000 mm²/s (40°C) |
| Einsatztemperatur: | -40°C bis +150°C |
| Materialien: | Naturfaser |
| Breite b | Zähnezahl | Di | Artikelnummer gradverzahnt | Artikelnummer schräg liks verzahnt | Artikelnummer schräg rechts verzahnt |
|
|---|---|---|---|---|---|---|
| Modul 1 | 15 | 32 | Ø12 mm | 012 13 001 15 32 | ||
| Modul 1,5 | 15 | 24 | Ø12 mm | 012 13 015 20 24 | 012 13 015 15 24L | 012 13 015 15 24R |
| Modul 2 Standard | 20 | 17 | Ø12 mm | 012 13 02 20 17 | 012 13 02 20 17L | 012 13 02 20 17R |
| Modul 2 | 20 | 18 | Ø12 mm | 012 13 02 20 18 | 012 13 02 20 18L | 012 13 02 20 18R |
| Modul 2 | 24 | 18 | Ø12 mm | 012 13 02 24 18 | 012 13 02 24 18L | 012 13 02 24 18R |
| Modul 2 | 24 | 18 | Ø12 mm | 012 13 02 24 19 | 012 13 02 24 19L | 012 13 02 24 19R |
| Modul 2,5 | 24 | 17 | Ø12 mm | 012 13 025 24 17 | 012 13 025 24 17L | 012 13 025 24 17R |
| Modul 3 Standard | 30 | 17 | Ø12 mm | 012 13 03 30 17 | 012 13 03 30 17L | 012 13 03 30 17R |
| Modul 3 | 30 | 18 | Ø12 mm | 012 13 03 30 18 | 012 13 03 30 18L | 012 13 03 30 18R |
| Modul 4 Standard | 40 | 17 | Ø12 mm | 012 13 04 40 17 | 012 13 04 40 17L | 012 13 04 40 17R |
| Modul 4 | 40 | 19 | Ø12 mm | 012 13 04 40 19 | ||
| Modul 4 | 50 | 15 | Ø20 mm | 012 13 04 50 15 | ||
| Modul 5 Standard | 50 | 17 | Ø20 mm | 012 13 05 50 17 | 012 13 05 50 17L | 012 13 05 50 17R |
| Modul 5 | 24 | 17 | Ø12 mm | 012 13 05 24 17 | ||
| Modul 5 | 30 | 17 | Ø12 mm | 012 13 05 30 17 | 012 13 05 30 17L | 012 13 05 30 17R |
| Modul 6 Standard | 60 | 17 | Ø20 mm | 012 13 06 60 17 | 012 13 06 60 17L | 012 13 06 60 17R |
| Modul 6 | 60 | 18 | Ø20 mm | 012 13 06 60 18 | ||
| Modul 6 | 40 | 17 | Ø12 mm | 012 13 06 40 17 | ||
| Modul 8 | 40 | 12 | Ø12 mm | 012 13 08 40 12 | ||
| Modul 8 | 45 | 12 | Ø20 mm | 012 13 08 45 12 | ||
| Modul 8 | 80 | 12 | Ø20 mm | 012 13 08 80 12 | ||
| Modul 8 | 80 | 17 | Ø20 mm | 012 13 08 80 17 | ||
| Modul 10 | 100 | 10 | Ø20 mm | 012 13 10 100 10 | ||
| Modul 10 | 100 | 13 | Ø20 mm | 012 13 10 100 13 | ||
| Modul 11 | 150 | 10 | Ø20 mm | 012 13 11 150 10 | ||
| Modul 12 | 100 | 8 | Ø20 mm | 012 13 12 100 08 | ||
| Modul 14 | 100 | 8 | Ø20 mm | 012 13 14 100 08 | ||
| Modul 15 | 80 | 13 | Ø20 mm | 012 13 15 80 13 | ||
| Modul 16 | 60 | 8 | Ø20 mm | 012 13 16 60 08 | ||
| Modul 16 | 100 | 8 | Ø20 mm | 012 13 16 100 08 | ||
| Modul 16 | 120 | 8 | Ø20 mm | 012 13 16 120 08 | ||
| Modul 20 | 200 | 8 | Ø20 mm | 012 13 20 200 08 | ||
| Modul 24 | 200 | 8 | Ø20 mm | 012 13 24 200 08 |
| Variante | Behälter-Volumen | Modell | Zeichnung |
|---|---|---|---|
| Zentralschmiergerät X3.2 | 2,5 Liter | STEP-Modell | |
| Zentralschmiergerät X3.5 | 5 Liter | ||
| Zentralschmiergerät X3.8 | 8 Liter |
Fill out the form on the right and you will hear from us shortly!
*We use the data entered here exclusively to communicate with you and, for example, to send you a desired offer… The data will never be passed on to third parties without being asked!
